1. Prepare the Cartridge: Cut the tip of the nozzle to your desired bead size (¼” recommended) and break the foil seal inside the cartridge before applying.
2. Apply the Adhesive: Dispense in a continuous bead along the surface where bonding is required.
3. Set and Secure: Position materials in place while the adhesive is still tacky. Adhesion begins during the curing process and continues to strengthen over 7 days.

Application Tips

• Cut the nozzle tip slightly wider than usual for easier, smoother application.
• Ideal application temperature: 60°F–100°F (16°C–38°C).
• Can be applied to wet surfaces — mist the area lightly with water (H₂O) to accelerate curing and increase bond strength.
• Suitable for vertical or overhead applications without sagging or troweling (non-slump formula).

• Coverage: A ¼” bead provides approximately 26 linear feet per cartridge.
• Clean-Up: Use rubbing alcohol before the product cures.
• Strength:
  • Delivers over 50 PSI or 3,000 lbs per linear foot of bond area.
  • Offers instant green strength, capable of holding 17 lbs or more of dead weight before fully cured — requiring minimal support.
• Temperature Resistance: Once cured, withstands extreme conditions from –40°F to 300°F.
• Not Recommended For:
  • Adhering firebrick inside outdoor fireplaces (due to 300°F max limit)
  • Use on porcelain, aluminum, steel, marble, granite, fiberglass/glass, or most woods
• Storage: Do not store below 32°F.
• Formula:
  • 100% solids, contains no solvents
  • Suitable for wet substrate application, unlike silicone, polyurethane, or latex adhesives
  • A one-part moisture-cure hybrid polymer that remains flexible, forming a durable, long-term rubber bond
  • Non-shrinking formula reduces material usage by up to 50% or more